RMT Discovery 3 Front Valve Block Kit

RMT Discovery 3 Front Valve Block Kit

Article by RMT

The front air suspension valve block is located on the right-hand side of the passenger wheel arch and is easily accessed by removing the passenger wing liner. First thing to do is remove the fuse that governs the air system (usually under the bonnet). This will disable calibration through the night and allow you to pin point which section of your struts have lost most pressure through the night, once you know this it’s a simple case of loosening the lines from the old valve block, pulling it out and plugging in the new one. It’s an easy 10-15 min job at most.

This listing is for the complete kit as illustrated in the main listing picture and also includes all of the main valve block solenoid orings 40 in total.

Tags:audi q7 valve block