Audi Q7 Valve Block
Audi Q7 Valve Block
The audi q7 valve block distributes air from the air suspension compressor to the Air Struts or Air Springs of the Audi Q7. Over time the o-rings on this part can dry out and cause problems, like a sagging or uneven lift. This is usually caused by a leak or failure of the height sensor or other issues with the air suspension struts or air springs. Changing the height sensors can help, but often a new air valve block is needed.
This audi q7 valve block directly replaces the original unit on specific vehicles. It restores proper suspension performance after the original unit has failed. RAPA Air Suspension Valve Blocks are made to high quality standards and have been tested for electrical and pneumatic integrity.
These solenoid valve blocks are a vital component to the operation of the air suspension system on your vehicle. They are responsible for sending the air from the suspension compressor to each corner that utilizes an air suspension and are commanded by the car's computer. The valve block is composed of five magnetic valves and compressed air connections that are normally closed. Once triggered by the air suspension control unit, these solenoid valves open and send air to each of the corners that use the air suspension.
The valve block is a great place to start when troubleshooting an air suspension issue on your vehicle, or if you are looking to upgrade. It will likely save you some time and money in the long run if your vehicle is experiencing problems, such as the audi q7 leaning to one side or an uneven ride height due to faulty air springs or air suspension struts.