Audi Q7 Valve Block

Audi Q7 Valve Block

Audi q7 valve block is a part that is responsible for the distribution of compressed air made by the suspension compressor. It is commanded by the computer and sends air to the corners that use the air suspension system. The valve block also distributes air to the pressure tank and the airbags.

Valve Block O-Rings Dry Rot and Leak

If the O-rings in your audi q7 valve block become faulty, they can dry rot and leak air to the compressor or the electrical solenoids. This can cause the compressor to overwork and damage the valve block. This is a common problem and you may want to replace the compressor or valve block if this is the case.

The Audi Q7 is a popular SUV that has a comfortable cabin and an excellent feature set. The interior is very sleek and modern and features a lot of technology.

It also has an active dampener and a roll stabilizer. These systems can be a little difficult to understand, but they do work and are very useful for driving in rough conditions.

Suspension Problems with the Air Suspension

The audi q7 has a very active air suspension system that is able to automatically adjust the ride height of your vehicle depending on the road surface and speed. The system is also able to control the amount of compression in the air springs.

Leaning Issue with the Suspension

Sometimes, due to wear and tear in the audi q7 air suspension system, it will make your car lean to one side. This is a very common problem that can occur as a result of normal wear and tear, so it is a good idea to take your audi q7 in for an inspection. This is especially true if the suspension is not performing properly.