AccuAir Valve Block - Why It's So Important to Your Vehicle's Air Suspension
AccuAir Valve Block - Why It's So Important to Your Vehicle's Air Suspension
The accuair valve block is one of the most important parts of an air suspension system.accuair valve block It is responsible for distributing the pressurized air that the air compressor pumps into your vehicle’s pressure reservoir to your air springs and struts.
In order to keep the air flowing in the right direction, the valve block has six solenoid valves that activate based on 12-volts from a controller or toggle switch.accuair valve block These valves open and close to send pressurized air into the pressure reservoir, which then flows into the valve manifold.
Often overlooked, the valve block can play a vital role in keeping your air suspension working. If one of the solenoid valves goes bad, it could cause the air compressor to stop operating, or your ride height to drop.
The valve block also allows the air to flow to and from the pressure reservoir without releasing excess pressure into the air springs. This way, the air compressor only runs when necessary, and you don’t have to worry about a surge of excessive pressure causing damage to your tires.
There are many ways that a valve block can go wrong, but the most common is that it may become stuck. This happens when small particles, such as metal shavings, become embedded in the valve block’s housing and interfere with the operation of the solenoid valves inside.
Another way a valve block can fail is that it can be damaged by water or moisture, which will corrode the internal components. This is particularly a problem when the outside temperature drops below freezing degrees, as moisture can freeze in the solenoid valves inside the valve block.
A faulty valve block can also be the culprit in the air leaks that you have noticed. This is especially common on cars with front air bags, where a small leak might be causing your rear air bag to collapse.
Thankfully, AccuAir offers the best valve block in the business to help you avoid these common problems. Our high quality VU4 and VU2 valve manifolds are outfitted with a high-quality, weather-proof plug-n-play harness to make installation quick and easy and accurate wire connections built to last in the harsh under-vehicle environment.
Our new design manifolds feature all stainless steel valve components and a robust internal solenoid valve architecture to maximize flow rates, provide bubble-tight sealing, and guarantee operation up to 200 psi for millions of cycles. These manifolds are the cleanest and most reliable on the market today.